8fun bbs eb-bus extension cable; cable length: 50cm.

8fun bbs push button ebrake enable you to change gear more smoothly.  The motor stops when push the button.

Bafang BBS brake, brake sensor or throttle extension cable. If you build an electric tri-cycle or cargo bike, this extension cable is a must because the original brake and throttle of the bbs kits are too short. The price is for one cable, if you need it for the brake, you may need to order two of this cable.

This wire is also suitable for Ultra M620 or Max drive M400 mid motor.

Bafang BBS kit install tool;

Bafang BBS M33 Lockring and cover atightening spanner.

Wrench for 8FUN BBS M33 nut and cover.

C-type wrench for M33 lock ring and cover.

Material: Stainless steel.

Bafang bbs01/bbs02/BBSHD spare parts kit, as shown in the picture,  including 1x M33 nut, 1x Triangle fixing plate,  2x Crank arm mounting bolts, 2x Fixing plate mounting rews(M6*12), 5x Chainring mounting bolts(M5*10), 5x Chainwheel cover self-tapping screw(ST3.9)

Bafang BBS crank arm; bafang M400 /m300 crank arms

Bolts for 8fun bbs01 or bbs02 chainring adapter. This bolt is also suitable for some mountain bike chainring. Please refer to our drawing and check the length you need before ordering.

Waterproof Brake sensor for bafang motor kits, BBS, M620, M500, M600, M400, M420 etc motors.

We only have black color brake sensors in stock now. 

The front sensor is 35cm length and rear sensor is 110cm length.

Thumb throttle/accelerator for Bafang central driven motor kit bbs01, bbs02,  BBSHD, Ultra G510 M620, Max drive M400, M420, M500, M600 or M800 mid motors.

Note: This throttle also fit for Bafang Max Drive M400 G330 motor, but you need to change to a 1T4 EB-BUS, otherwise you cannot connect the throttle to your Max drive unit.

8FUN central driven motor bbs01/bbs02 eb-bus cable for connecting LCD meter, throttle and brakes.

8fun central motor kit speed sensor for BBS01, BBS02 BBSHD kit. If you need speed sensor extension cable, we have 300mm and 1000mm speed sensor extension cable for your option. 

Bafang has upgraded the speed sensor. We now only have the latest version bbs speed sensor. 

8FUN BBS01 central driving kit spare parts, M33 nut, if you need a spanner for the M33 nut, you can order the M33 wrench on our website.

Gearing adapter for bafang mid crank kit bbs01 and bbs02. 32T-48T Chainring with 104mm BCD can be used for bafang bbs kits with this chain ring spider. 4 bolts are included.  The chain ring is not included, please be noted.

Chainring spider for bafang mid crank kit bbs01 and bbs02. 38T-55T Chainring with 130mm BCD can be used for bafang bbs kits with this chain ring spider. One spacer and 5 bolts are included.  The chain ring is not included, please be noted.

Bafang mid crank kit bbs01 and bbs02 brake grip. 

This e-brake fits for all the Bafang motors with round Higo connector.

Bafang,8FUN BBS01, BBS02 mid crank kit chainwheel guard, plastic cover.

The cover is the same for 46T and 48T.

Bafang 500W/750W rear hub motor SWX02 /RM G020; this motor was called SWX02 motor before, now Bafang name it RM G020  model. It has two types threaded freewheel type and cassette freewheel type.

48V350W

48V500W

36V350W

36V500W

For threaded freewheel type, fork size is 135m;

For cassette freewheel type, fork size is 138mm.

Hall sensored with 9ppin motor cable

This SWX02 hub engine is also compatible with 6 hole disc brake;

RM G020 motor is with 36 spoke holes.

Bafang RM G062 48V 750w / 1000W hub motor,  it is an upgraded version for  RM G060 fat-bike motor.

This high torque motor, max torque to be 85Nm, can be used for eFat or Electric cargo bikes which enable you electric snow-bike or e-cargo bike to run effectively. 

9pin split motor cables; cable length: 1m.

Bafang has two types connectors for this motor. One is with red connector and the other is with the black connector.

For 1000W motor, our190mm forksize motors is with black connector while the 175mm forksize motor is with the red connector. Please check the pictures on our website and choose the right one.

For 750W motor, the forksize is 190mm with new version red connector, please note.

Fatbike motor cable for Bafang 750W RM G06 snow bike hub motor.

The female cable length is 80cm, the phase wire adapts Φ5 BBS bullet connector which can bear larger current.

The extension cable length is 110cm.

Bafang hub motor clutches for 8FUN BPM,CST, RM G07 /H610 /H620 etc motors. The clutch is with 42T nylon gears.

The clutch has two versions, the old version has 4 key slots and the new version has only one key slot, please check your own motor clutch before making the order. By the way, the new clutch can be used for both BPM motors or Bafang CST motors(produced after 2014).

The clutch includes gears. 

We stopped selling the old version BPM/CST/RM G070 motor clutch because according to a few customer's feedback, the old version clutch cannot fit their BPM/CST/H610/H620 hub motor.

We are currently selling 3 types of Bafang hub motor clutches. The difference for the three types clutch: BPM/CST/H610 clutch uses 42T nylon gear; SWXK/SWXH/RM G010 clutch uses small 36T nylon gear(we have this nylon gear available on our website); SWX02 clutch uses bigger 36T nylon gear(48mm in diameter, 14mm in thickness; we don't have this big 36T nylon gear available currently). The only difference for the two SWX02/RMG 06 fatbike motor clutches is the inner bearing of the nylon gear, theoretically, the two clutches are compatible with each other.

Some Bafang motors share the same motor clutch, therefore if you don't know what Bafang model your motor is, you can measure the dimension of your original clutch, if it is the same dimension as ours, then you can order it for your motor.

All our motor clutches are sourced directly from Bafang.

For how to replace Bafang hub motor clutch, please refer to the following video:

BBSHD 52V 1000W with 500C, DPC18, C961 or C965 LCD display, EB-BUS cable set, brake lever, speed sensor etc. The Bafang BBSHD is with high torque and easy assembling for electric bicycle conversion. The bbshd kit has a controller and PAS inside the motor. If your bike is fat bike, Bafang BBSHD would be the best choice for you. Installation tools will be provided for free with the bbs kit. The lead time is about a week, please be noted.

Bafang bbs kit 36V250W, 350W, 500W kit and 36V Hailong 01 Pro(G70)down tube frame battery; 120W, 180W  42V chargers for options. You can choose 500C, C961, DP C18 or C965 LCD display for the kit. Battery fixing plate is also included.  Bafang has upgraded bbs kits to be BBS01B and BBS02B, the new models are better in waterproofing. Installation spanner will be included for free.