36V/48V 500W Kunteng/KT sine wave controller for e-bike.  The controller can work for KT meter(LCD8H, LCD8S, LCD7U, LCD5, LCD3, LCD1, 890 LED, 900S LED, 880LED etc). All the KT LCD/LED Meter can work for this controller. 

This e bike controller can only work for hall sensored motor;  it is compatible with 36V or 48V 500W motors(auto switch between 36V and 48V);

It is sine wave controller, can work with or without LCD/LED meter. Sine wave controller is better than form wave controller.

Presell controller with reasonable price. This eike controller will be available on 15 April. If you need the controller urgently, please consider other controller.

This wire includes male part and female part, no matter your controller lcd connector is with Higo/Junlei waterproof connector or standard 5P JST connector, you can use any KT LCD meter for your controller. If your KT LCD meter is defective or you want to use other model KT LCD(LCD1, LCD2, LCD3, LCD5, LCD7, LCD8S or LCD8H) control panel, this cable make it available.

Bafang M560 /G5300 48V 500W 750W motor kit. We have matching alloy frame or carbon fibre frames for the M560 motors, please email us if you need the frame for the motor.

There are two types hangers for M560 motors, and the matching guards and motor cover are also different accordingly. Please check your own hanger before ordering.

If you don't have a hanger for the motor, you can also add a hanger with the kit.

The motor is with CAN protocol. Please let us know the wheelsize and speed you need, and we will set them before shipping.

Bafang has upgraded the M560 motors in 2024, the upgraded motors are silent than the previous version.

If you need the bike frame for the M510 kit, please click here: Bafang M510 full suspension bike frame

250W ebike brushless controller, 24V and 36V compatible, including LCD meter, 8 poles PAS and speed sensor.This controller reduces motor noise and you will feel the torque is stronger when changing the PAS level via the LCD panel. It is sine wave controller with torque simulation function. The controller is suitable for sensored motor only, please be noted. If you want a colorful display, you can choose LCD1, LCD3, LCD5, LCD6(coming soon),  LCD7U, LCD8S or LCD8H.  If you need LED meter, you can consider KT-890 LED or KT-900S LED meter.

Do not know which LCD meter to choose, click here fore brief comparision for the above LCD meters:  KT-LCD1/LCD2/LCD3/LCD5

E-bike Kuntent KT LCD7U  meter with 5V1A charging USB port for mobile. The LCD7U display is compatible with 24V, 36V and 48V; you can read the battery capacity and votlage, riding speed and range, accumulated mileage etc. This LCD meter must work with KT serial controllers.

If you need the users' manual for the display, please check from here: KT LCD7U user's manual

If your controller is with waterproof connector, you can add a conversion cable for this LCD meter.

ABS controller case for ebike controller;

Small case is suitable for  250W controller-GBK-CON611, CON621 or CON63, can be mounted on the frame of bicycle;

Larger case is suitable for CON94 350W controller, can be mounted on ebike frame;

Bafang Fat-bike motor controller 48V 750W for RM G060.750D or FM G060.750D motors: this controller only work with  Bafang UART display(connecting via the Bafang EB-BUS); without the Bafang LCD and EB-BUS, the controller will not work.

This controller will not work for the 500W Bafang motor, because the 500W motor uses a small 9 pins connector while this 750W controller uses the "big" 9 pins connector.

There are 48V front light and tail light leads for the controller, if you connect lights, please make sure the voltage of the light is 48V DC input(the same voltage as the battery).  We have some controllers are with 6V front light and tail light for some customer's demand, please email us if you want to add lights to the controller.

The cable length for the 9 pins motor cable is about 50cm, if your hub is a front fat-bike motor, you may need an extension cable for the motor.  

KT 36V 48V  350W Sine Wave Motor controller, it is compatible with KT seiries LCD display or KT LED meters(LCD8H, LCD8S, LCD7U, LCD5, LCD3, LCD1, 890 LED, 900S LED, 880LED etc, cruise, pedal assist, over-current protection, under-voltage protection. This ebike controller is compatible with brake sensor; 

This brushless controller can auto identify 36V, 48V ebike system; It can also work without  LCD/LED meter.

36V/24V 250W GBK-100R rear motor kit for DIY e-bike conversion:

1. Hub motor GBK-100R 36V 250W or GBK-100R 24V 250W, rear driving, compatible with disc brake and 6/7 speed threaded freewheel;

2 Motor controller, compatible with LED/LCD meters: 36V/24V 250W sine wave controller

3. Electric brake grip or brake sensor

4. Electric gas/throttle

5. If you want to attach the controller to the bike frame, the small controller box can help;

6. LED meter/ LCD display for option(for LED/LCD meters details, please check the matching model of the meters on our website);

7. Pedal assisting sensor(PAS)

36V250W~350W GBK-100R electric bike kit, rear driving, sensor and sensorless for option, wheel size from 16"~28", the whole kit is about 6KG, it is very light kit with high speed hub motor.

The  headlight and tail light will be powered by the CON63 controller with a switch. We will solder all the matching wires and connectors before shipment.

GBK-100R 36V 250W~350W rear driving electric bike kit, including suitable controller, double walled rim and stainless spokes, PAS, throttle and brake, 36V11.6AH bottle battery and charger.

24V250W~350W GBK-100R rear driving electric bike kit, including 24V250W hub motor, 24V13.4AH Li-ion bottle battery and charger, controller, spokes, rim, throttle, brake and PAS.

GBK-100R 36V 250W~350W electric bike kit, rear driving including suitable controller, PAS, throttle and brake, double walled rim and spokes, 36V11.6Ah frog battery and charger. The motor is already assembled with rim and you don't need to assemble the motor yourself,