Bafang MAX drive M400 MM G330 / Bafang Ultra MM M620 G510 / Bafang M420/ Modest drive M300 G360 headlight cable / tail light cable

Cable length: 1m

We recently sourced tail light cables too.

Therefore the light cables are sell as pair, including tail light and headlight cables;

If you need the taillight for your Max drive or Ultra motor, please click here: 6V E-bike rear light, powered by Bafang max drive or Ultra M620 motor/controller

If you also need the headlight, please click here: 6V e bike LED headlight, directly powered by the Bafang M400 or G510 motor/controller;

Dengfu carbon frame E22 /E10 /E23 etc. derailleur hanger. Installation bolt and screw are included.

Bafang M620 M600 M500 M510 chainring spider BCD104;

If you install the BCD104 for M620, a 3mm thickness BB spacer would be needed.

Bafang M600 M510 chainwheel stabilizer.

Bafang Ultra M620 / G510 full suspension ebike alloy frame, 17" or 19" with glossy color. The frame is for 27.5" or 29" bikes only.

The price does not include the battery. If you need the battery, please email us, we can build the battery for you(you can choose Samsung or LG cells for the battery).

The intube battery case for this bike frame can max build 48V 17.5Ah.

Maximum tire: 29x3.0;

Head tube: 130mm;

Headtube angle: 64° ;

Real spacer: 148mm;

Material: 6061-T6 alloy

If you need carbon frame for the Bafang M620 kit, we also have carbon frame. Please email us if you need details for the carbon frame.

Bafang Ultra G510 M620 speed sensor;

Bafang M400 MAX drive G330 motor speed sensor;

Bafang Modest drive M300 G360 speed sensor.

Bafang M420 speed sensor.

Important: There are two types speed sensors, you can identify them by the connector, 4 pins connector is for CAN motors, and 3 pins connectors is for UART motors, please check your original speed sensor's connector before ordering. You can also check our pictures on the website for the connectors.

Thumb throttle/accelerator for Bafang central driven motor kit bbs01, bbs02,  BBSHD, Ultra G510 M620, Max drive M400, M420, M500, M600 or M800 mid motors.

Note: This throttle also fit for Bafang Max Drive M400 G330 motor, but you need to change to a 1T4 EB-BUS, otherwise you cannot connect the throttle to your Max drive unit.

Bafang shift sensor for MAX drive M400 G330, modest drive M300 G360, Bafang M420, Ultra M620 G510 mid motor.

Bafang Ultra M620/ G510 mounting bolts /nuts /washers, including chain wheel lock nut and the other bolts as shown in the picture.

If you need a special spanner for the chainwheel lock nut, please check from here: Bafang M620 chainwheel lock nut wrench 

SW102 mini LCD display for Bafang motors. This LCD is suitable for any Bafang motor with UART protocol(the round 5pin display connector), such as BBS01, BBS02, BBSHD, Ultra G510, Max drive M400, M420 etc.

1.3" OLED screen, waterproofed and small current consumption. 

If you need uers' manual, please click here: Bafang SW102 LCD display uers' manual 

E-bike 6V LED headlight suitable for Bafang BBS. Input: AC6V ; Cable length: 1.5M

Connector matching for Bafang BBS01/BBS02B controller's headlight plug, red wire for positive, blue wire for negative.

DPC18 display has a "headlight" button; for 965 and 961 display, press "+" button and hold for 3 seconds, the headlight will switch on/off.

If you use it for Ultra M620 mid motor, Bafang M400 motor, M420 or Bafang M300 motor, this 6V LED headlight will also be suitable for these mid drive motors. Please make sure you have the Bafang motor light connection cable.

8FUN central motor kit hydraulic brake sensor. It includes a sensor and a magnet. It is easy to install, just fix the two parts on your original brake handle bar. The price is for one brake sensor, if you need a pair for your bike, please order two sensors.

This oil brake sensor is suitable for BBS01, BBS02, BBSHD, Ultra M620, Max drive M400 etc.

Bafang DP C07( also called C966) display for Bafang Max drive M400, M300, BBS serial motors.  

Bafang DP C10 display Bafang M400, M300, M420 etc motors.

There are CANbus and UART protocols for the two displays, how to identify UART or CANbus? If your motor is CANbus, then your display must be CANbus, If your motor is UART motor, then your display is also UART protocol; another method is to check the display connector, CANbus display is with triangle connector while UART display is with round 5 pin female connector. You can check our picture.

UART display, please set the wheel size and speed yourself.

The C966 display has automatically backlight which would be more convemience during night riding.

Ebike rear light/taillight for safety biking. 6V LED with small power consumption for your ebike. 

If your bike has no rear rack to install the taillight, you can install the taillight on the seatpost tube, and we will provide you with the mounting bracket. 

The rear light is AC 6V input and you can connect to your Bafang mid motor directly, such as BBS, Max drive M400, M420,M300, Ultra M620 motor which has 6V light leads. If your motor is M620, MM420, M400 or M300, please make sure you have the motor light cable for connecting the front light or tail light.  The connector for the BBS01/BBS02, M620, M400, M420, M300 light is called 4.8 pins; for BBSHD light leads, there are two versions, at the beginning, BBSHD uses 2 pins SM connector for lights, later Bafang change to 4.8mm pins for BBSHD lights(they are going to use the same connector for all the Bafang motor lights), therefore, please double check your BBSHD light leads before ordering the light for your BBSHD motor.

If you prefer to power the rear light by the battery directly, we also have another tail light which can be used with DC6V to 60V batteries.

If you are going to use the rear light for Bafang Max drive or Ultra M620 mid motor, this rear light will also be suitable for them.

If your original bafang BBS motor has only a pair of light cables, while you want to connect both front light and taillight for your bike, then you can choose a Y cable for the light.

Bafang BBS brake, brake sensor or throttle extension cable. If you build an electric tri-cycle or cargo bike, this extension cable is a must because the original brake and throttle of the bbs kits are too short. The price is for one cable, if you need it for the brake, you may need to order two of this cable.

This wire is also suitable for Ultra M620 or Max drive M400 mid motor.

Dengfu frame battery mounting bracket with key lock;

Dengfu has upgraded the mounting base, the upgraded base is better in drainage.

There will be an ON/OFF switch and a 5.5x2.1DC charging port soldered with the bottom mounting bracket which can be used for the Dengfu frame directly. 

If you prefer to make a custom connection for the mounting bracket, please email us after placing the order. If you also need the Dengfu battery, please order from here: 48V Dengfu battery

We have two types of the battery mounting base, one is alloy mountings and the other is plastick mounting. We currently only have the plasic mountings available, please note.

Bafang bbs01, bbs02 or BBSHD LCD C961 or C965. The displays are with 5pin round connector.

If you need the manuals or specifications for the display, please click here: C965 users' manual or C961 users' manual

Bafang bbs01/bbs02/bbshd /Ulra M620/Max drive M400 /M500/M600/M420  left hand thumb throttle with Wuxing throttle and Higo connector. Cable length: 48cm.

Note: This throttle also fit for Bafang Max Drive M400 G330 motor, but you need to change to a 1T4 EB-BUS, otherwise you cannot connect the throttle to your Max drive unit.

Bafang BBS01/BBS02/BBSHD C965/C961/C963 LCD extension cable. Cable length: 50cm.

This LCD extension cable is also suitable for Ultra M620, Max drive M400 mid motor LCD which has the round 5pin LCD connector.