48V 13S 20A battery BMS with small size(65*35*10MM) for ebike downtube batteries, Hailong batteries, Jumbo shark batteries or Dorado batteries.

Note, this BMS is only suitable for 48V/13S li-ion battery; it is not suitable for LiFePO4 battery.  

The continuous discharge current is 20A, pulse/max discharging current is 50A; The max charging current is 5A.  

If you use this BMS for Dorado battery, please short circuit the switch wires.

If you are looking for larger current BMS,you can order order this one for you battery: 48V 13S BMS for downtube battery.

BMS/PCM-24S for 72V LiFePO4, continuous discharge current 30A/50A and pulse discharge current being 120A

We also have smart BMS with bluetooth app for 24S battery: intelligent bms with software/app control

12S BMS for 3.2V Lifepo4 battery pack, continous discharge current being could be 30A,  pulse/peak discharge current being 80A, suitable for 12S(36V) LiFePO4, phosphate battery and li-ion battery;

The BMS has 90 degree temperature protection sensor.

36V 10S lithium battery bms for customized battery building, COMcom(charging and discharging with the same COM)

1. Overcharge protection(Single cell 4.25V; 10S pack 42.5V);

2. Overdischarge protection(single cell 2.8V; 10S pack 28V)

3. Over current protection

4. Short circuit protection

5. Temperature protection

6. Balanced voltage

7. Discharging current/Peak discharging current: 15A/50A, 25A/60A, 35A/100A, 45A/180A, 60A/180A

8. Dimension: 59x34x9mm(for 15A BMS); 75x48x9mm(for 25A/35A/45A BMS); 80x61x16mm(for 50A/60A BMS);150x66x19mm(for 80A BMS); 166x65x24mm(for 100A BMS);

Recommend charging voltage: 42V

Charging current for the BMS/pack:  Less than the continuous discharging(Recommend less than 1C charging current which would be better for the battery lifespam).

17S 30A 40A 50A BMS /PCM, Battery management system for 60V Li-ion battery, continuous discharge current could be 30A, 40A or 50A, peak/pulse discharge current could be 100A. 

Common Port can handle large charging current; separate port would be with smaller charging current(5A~10A, please refer to detail information on our website);

This BMS has LED for balance, you will get to know which cells are in balance status and which cells are not in balance status.

24V11.6AH Li-ion bottle battery for electric bicycle, mounted on the bicycle frame, including charger. Long lifecycle and high performance.

24V lithium ion/lipo battery for electric bicycle, easy mounted and portable; ABS case/Frog case, 120W alloy charger and PCM-7S are included. 

Dual battery converter with wide DC input 24V -72V. 

Output: DC 24V -72V, max 30A or 40A current. 

Input with XT60 male connector; output with XT60 female connector. 

If you have two batteries(24V-72V),  you want to use the two batteries with one ebike, then you can connect the two batteries with the dual battery converter.  

When you are going to charge the battery, please switch one of the batteries first before charging because the dual battery converter only protect the two batteries discharging; it has no protection for simultaneous charging.

1200W 12V 50A (14.6V, 12.6V or 16.8V)charger for lithium ion battery, LiFePO4 battery or Lead acid battery. Fast charging, easity to carry; over-current protection, over-charging protection, shortcircuit protection and reverse connect protection are available for the charger. Smart charger with three charging mode: CC, CV and 
trickle charging. Charging current and voltage can be read by the LED on the charger.

42V2.5A silent charger for 36v lithium ion battery. This charger is with alloy shell and cooling fan, but it has no noise. It is new designed charger for silent charging. If your battery is 36V Li-ion battery, then this charger is suitable for you. 

Charging connector: DC connector, which is suitable for 36V Hailong-01 casing battery, tigershark 36V battery（DS-6）, 36v bottle battery, new polly 36V battery, and frame DA-5C battery.

The leadtime for the charger is about a week, please note.

Alloy shell charger 1200W for lithium ion, LiFePO4 or Lead acid batteries. Charging voltage and current are as follows: 12V50A, 24V30A, 36V25A, 48V20A, 60V15A, 72V12A; The charger will stop charger after fully the battery charged.  The charger has an LED display and you can view charging voltage and charging current when charging. 

900W battery charger for petrol car, golf car, electric car, seesighting car, electric motor cycle batteries. Charging voltage and current are as follows: 12V40A, 24V25A, 36V18A, 48V15A, 60V12A, 72V10A; customized charging voltage is available, please email us if you have need special charging voltage for the battery charger;

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

600W alloy shell battery charger for electric motorcycle, golfcar, petrolcar, electric car battery, 12V25A, 24V18A, 36V12A, 48V10A, 60V8A;

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

400W alloy charger for electric vehicle, LiFePO4, lithium-ion and lead acid battery; 12V20A, 24V12A, 36V8A, 48V6A, 60V5A

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

120W alloy shell charger for LiFePO4, Li-ion and lead acid battery, 12V6A, 24V3A, 36V2.5A, 48V2A

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage

If you need customized voltage for your battery, please email us.

240W battery charger for lifepo4, li-ion and lead acid battery, suitable for 12V, 24V, 36V, 48V etc. Input voltage 90Volts~240Volts, can be used in any country in the world.

We also provide customized charging voltage, please email us if you need special charging voltage for the charger.

1. It has LED indicator for charging status.

2. The charger is with alluminum alloy shell which is good for heat radiation；

3. It has a cooling fan to protect over heating when charging;

4. Over current protection,over voltage protection, short circuit proteciton and reverse polarity.

5. Full automatic transition of CC,CV(Lithium ion/LiFePo4) and Float/Cut off(Lead acid).

Please email us if you don't know how to calculate the charging voltage;

The default connection for the XLR connector is 1 +, 2-, 3 empty.

54.6V 3A 180W Alloy shell charger for 48V(13S) hailong-01 casing battery, new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

Charging connector: 5.5*2.1DC connector;

AC Input: 110V, 220V or 240V;

Charging current: 3A(the larger amps the charger has, the faster the battery will be charged).

36V Hailong02 downtube battery charger 180W 42V 4A Alloy shell charger with 3pin XLR(kanong) connector.

Charging connector: 3Pin Male XLR connector(pin 1 for positive, pin 2 for negative, pin 3 empty);

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

36v lithium downtube battery charger 180W 42V 4A Alloy shell charger with DC connector.

AC Input: 110V, 220V or 240V;

Charging current: 4A(the larger amps the charger has, the faster the battery will be charged).

Charging voltage: 42V(for 36V lithium ion battery); the charging voltage can be slightly adjusted according to customer's demand.

Alloy shell and cooling fan enable the charger to be cool when charging.

Charging connector: 2.5DC connector(default); there are two DC connectors, 2.5DC and 2.1DC; if you are not sure your charging port is 2.1DC or 2.5DC port, please add an extra 2.1DC cable for backup, once the default 2.5DC connector is not suitable for your charging port, you can change to 2.1DC connector;

54.6V 2A 120W Alloy shell charger for 48V(13S) hailong-01 casing battery, Jumbo shark new polly DP-6 casing battery, frame battery(DA-5C), bottle battery or tigershark(DS-6) battery;

AC Input: 110V, 220V or 240V;

Charging current: 2A.

Charging connector: 5.5*2.1DC connector(Default); there are two types DC connector, 2.1DC and 2.5DC connector, if you are not sure your charging port is 2.5DC or 2.1DC, you can add a 2.5DC cable, you can convert the charging connector from 2.1 to 2.5 with the cable.

3-pin charging cable and charging port forJumboshark/Supershark casing battery. There are similar 3 pin charging port in the market, please make sure your battery key has the "Reention" logo, other brand 3 pin charging port would not fit. 

This charging carble and connectors are only suitable for Jumbo shark or Super shark casing batteries, Dorado batteries or other Reention casing batteries, please note.

Please make sure the pins are matching when you try to replace this charging cable to your old charging cable.

This charging cable enables your battery can be charged with larger current.

The cable length is 100cm.

Please check the below video for how to replace the charging cable from the inside of the charger:

58.8V 3A alloy charger for 52V 14S tigershark frame battery packs;

Charging voltage: 58.8V

Charging current: 3A(larger charging current makes fast charging);

Housing: Alluminum alloy shell which is better in cooling(all the chargers will be heat when charging);

Charging connector: 5.5* 2.1DC connector which is suitable for tigershark DS-6 casing 52Vbattery or New polly DP-6 casing 52V battery;