BMS for 36V Li-ion ebike battery with countinuous discharge current being 20A. This BMS is small in dimension(L*W*H: 65*35*9mm) which you can install it into many different battery cases. If you want to make a 5V output for charging your mobile or ipad, you can add a 5V1A USB PCB when ordering the PCM.

The battery BMS has a ON/OFF switch, if you don't have swtich for your battery, you can just solder the two switch wires together.

The battery BMS also has a high temperature protection sensor; if the battery is too high in temperature, the BMS will cut off power to protect the battery.

With this 5V PCB, you can make a 5V USB output from your battery. We use this Decompression PCB for our Hailong-2 battery USB output, tigershark downtube battery USB output etc. This PCB is suitable for 8V-63V lithium batteries. Harness will be included.

The USB port does not include with the PCB, please be noted. The USB output is included with the battery case. We will solder the harness before shipment if we get to know which  battery case you are going to use; different cases require different connection for USB output, if the harness is not soldered when you get the item, please solder youself with the correct connection.

If the connection is wrong, there will be no output for the USB port.

13S 48V li-ion BMS for ebike lithium ion batteries. The continuous discharging current for the BMS is 20A. This BMS is with smallest dimension. It fits for our Hailong-2 casing, tigersharkcasing, junbo shark, new polly casing ebike batteries. If your battery case requires USB outlet, you can order the 5V USB PCB on our website.

E-bike BMS for downtube battery. This PCM has no ON/OFF switch, if your battery has ON/OFF switch, then this BMS is not suitable for your battery. This BMS is used for our down tube battery(hailong -1 casing), please click the above link for the battery case to ensure you wouldn't order the wrong bms before making the order. If your PCM is defective, you can buy this one for replacement. THe BMS is for 36V or 48V li-ion ebike batteries, Harness is included with the BMS. 

The model for the BMS is: PCM-L13S15-B14 or PCM-L13S15-B14(A-2); please see below video for the bms connection.

PCM for ebike bottle batteries, round shape batteries, 24V or 36V lithium batteries.

For bottle batery BMS connection diagram, we will send you by email.

48V 13S 20A battery BMS with small size(65*35*10MM) for ebike downtube batteries, Hailong batteries, Jumbo shark batteries or Dorado batteries.

Note, this BMS is only suitable for 48V/13S li-ion battery; it is not suitable for LiFePO4 battery.  

The continuous discharge current is 20A, pulse/max discharging current is 50A; The max charging current is 5A.  

If you use this BMS for Dorado battery, please short circuit the switch wires.

If you are looking for larger current BMS,you can order order this one for you battery: 48V 13S BMS for downtube battery.

BMS/PCM-24S for 72V LiFePO4, continuous discharge current 30A/50A and pulse discharge current being 120A

We also have smart BMS with bluetooth app for 24S battery: intelligent bms with software/app control

12S BMS for 3.2V Lifepo4 battery pack, continous discharge current being could be 30A,  pulse/peak discharge current being 80A, suitable for 12S(36V) LiFePO4, phosphate battery and li-ion battery;

The BMS has 90 degree temperature protection sensor.

36V 10S lithium battery bms for customized battery building, COMcom(charging and discharging with the same COM)

1. Overcharge protection(Single cell 4.25V; 10S pack 42.5V);

2. Overdischarge protection(single cell 2.8V; 10S pack 28V)

3. Over current protection

4. Short circuit protection

5. Temperature protection

6. Balanced voltage

7. Discharging current/Peak discharging current: 15A/50A, 25A/60A, 35A/100A, 45A/180A, 60A/180A

8. Dimension: 59x34x9mm(for 15A BMS); 75x48x9mm(for 25A/35A/45A BMS); 80x61x16mm(for 50A/60A BMS);150x66x19mm(for 80A BMS); 166x65x24mm(for 100A BMS);

Recommend charging voltage: 42V

Charging current for the BMS/pack:  Less than the continuous discharging(Recommend less than 1C charging current which would be better for the battery lifespam).