Bafang 500W/750W rear hub motor SWX02 /RM G020; this motor was called SWX02 motor before, now Bafang name it RM G020  model. It has two types threaded freewheel type and cassette freewheel type.

48V350W

48V500W

36V350W

36V500W

For threaded freewheel type, fork size is 135m;

For cassette freewheel type, fork size is 138mm.

Hall sensored with 9ppin motor cable

This SWX02 hub engine is also compatible with 6 hole disc brake;

RM G020 motor is with 36 spoke holes.

Bafang RM G062 48V 750w / 1000W hub motor,  it is an upgraded version for  RM G060 fat-bike motor.

This high torque motor, max torque to be 85Nm, can be used for eFat or Electric cargo bikes which enable you electric snow-bike or e-cargo bike to run effectively. 

9pin split motor cables; cable length: 1m.

Bafang has two types connectors for this motor. One is with red connector and the other is with the black connector.

For 1000W motor, our190mm forksize motors is with black connector while the 175mm forksize motor is with the red connector. Please check the pictures on our website and choose the right one.

For 750W motor, the forksize is 190mm with new version red connector, please note.

Fatbike motor cable for Bafang 750W RM G06 snow bike hub motor.

The female cable length is 80cm, the phase wire adapts Φ5 BBS bullet connector which can bear larger current.

The extension cable length is 110cm.

Bafang hub motor clutches for 8FUN BPM,CST, RM G07 /H610 /H620 etc motors. The clutch is with 42T nylon gears.

The clutch has two versions, the old version has 4 key slots and the new version has only one key slot, please check your own motor clutch before making the order. By the way, the new clutch can be used for both BPM motors or Bafang CST motors(produced after 2014).

The clutch includes gears. 

We stopped selling the old version BPM/CST/RM G070 motor clutch because according to a few customer's feedback, the old version clutch cannot fit their BPM/CST/H610/H620 hub motor.

We are currently selling 3 types of Bafang hub motor clutches. The difference for the three types clutch: BPM/CST/H610 clutch uses 42T nylon gear; SWXK/SWXH/RM G010 clutch uses small 36T nylon gear(we have this nylon gear available on our website); SWX02 clutch uses bigger 36T nylon gear(48mm in diameter, 14mm in thickness; we don't have this big 36T nylon gear available currently). The only difference for the two SWX02/RMG 06 fatbike motor clutches is the inner bearing of the nylon gear, theoretically, the two clutches are compatible with each other.

Some Bafang motors share the same motor clutch, therefore if you don't know what Bafang model your motor is, you can measure the dimension of your original clutch, if it is the same dimension as ours, then you can order it for your motor.

All our motor clutches are sourced directly from Bafang.

For how to replace Bafang hub motor clutch, please refer to the following video:

BBSHD 52V 1000W with 500C, DPC18, C961 or C965 LCD display, EB-BUS cable set, brake lever, speed sensor etc. The Bafang BBSHD is with high torque and easy assembling for electric bicycle conversion. The bbshd kit has a controller and PAS inside the motor. If your bike is fat bike, Bafang BBSHD would be the best choice for you. Installation tools will be provided for free with the bbs kit. The lead time is about a week, please be noted.

Bafang bbs kit 36V250W, 350W, 500W kit and 36V Hailong 01 Pro(G70)down tube frame battery; 120W, 180W  42V chargers for options. You can choose 500C, C961, DP C18 or C965 LCD display for the kit. Battery fixing plate is also included.  Bafang has upgraded bbs kits to be BBS01B and BBS02B, the new models are better in waterproofing. Installation spanner will be included for free.

Bafang bbs kit 36V 250W/350W/500W kit and 36V Hailong 01 casing down tube battery; 42V alloy charger for option. You can choose C961, DPC18 or C965 LCD display for the kit. Bafang has upgraded bbs kits to be BBS01B and BBS02B; the new models are better in waterproofing. The assembling tools are included: one M33 spanner and Allen key set free of charge.

8FUN/Bafang bbs02B kit 48V750W, 48V500W with 48V14AH Hailong 01 downtube battery. battery fixing plate are included.  Bafang has upgraded bbs kits to be BBS01B and bbs02B for better waterproofing. Installation tools are included with the shipment.

 If your needs longer cords for installing the BBS kit, we have BBS EB-BUS extension cord, speed sensor extension cable, LCD extension cable, brake/throttle extension cable as well.

Bafang bbs01B kit 36V250W kit and 36V11.6AH, 36V13.4AH, 36V16AH, 36V14.5AH or 36V16.75AH Atlas frame battery with 5V USB output on the battery, the larger capacity your battery has, the longer journey your bike can ride each charge; Different chargers for option. You can choose C961, DPC18 or C965 LCD, 500C display for the kit. 8FUN has upgraded bbs kits to be BBS01B and BBS02B for better waterproofing. All of our bbs kits are the latest versions. Installation tools are included.

8FUN/Bafang bbs02B kit 48V750W/500W and 48V12.8AH or 48V14AH Atlas frame battery with 5V USB output for mobile phone or ipad charging. Different chargers for optoin; battery fixing plate are included.  All of our bbs kits are the latest version now. Installing tools are provided with the kit for free.

IF you want a back up mounting for the battery, we can also provide it.

Bafang bbs01B 36V 250W/350W mid crank kit with 36V bottle battery. Chargers are optional with the kit. You can choose DPC18, C965 or C961 LCD meter for the kit. Bafang has upgraded bbs ktis to be bbs01b and bbs02b models for better water-resisting. All of our bbs kits instock is the newest version.

Installation tools will be provided free of charge.

Bafang/8FUN bbs kits BBS02B, 48V500W or 48V750W(controller upgraded) with C961, DPC18 or C965 LCD display, EB-BUS cable set, brake lever, speed sensor etc. This kit is high torque and easy to assemble for electric bicycle conversion. The bafang bbs02B kit has a controller and PAS inside the motor. Bafang has upgraded bbs kits to be BBS01B and BBS02B for better water resistance. The difference between bbs01/bbs02 and bbs01b/bbs02b is the controller; the controller for BBS01B/BBS02B is slightly bigger. Installation tools will be sent free of charge.  

Bafang BBSHD kit with 48V hailong downtube battery with 30A BMS for high power electric fatbike or MTB conversion. If you need high power e-bike, this kit would be the best for you with good motor and good battery. The battery has an ON/OFF switch and A 5V USB output for portable device charging.

1. You can choose standard 48V hailong downtube battery for the kit; if you want the ebike to be more powerful, you can choose the 52V Jumbo shark battery for the BBSHD kit;

2. For charging of the battery: the charging port is 3pin Kanong(XLR) connector with pin1 +, pin 2-, pin 3 empty; if you prefer fast charging, please consider larger charging current for the charger;

3. The discharging port for the battery is 5pin golden round contacts connector;

4. The BBSHD kit is with the latest controller, we will set and solder the parts needed before shipment. You can use the kit and battery directly when you receive them;

5. The mounting foot for the battery is included, if you need an extra mounting foot for the battery, please click here: Hailong02 mounting foot

Bafang BBS02B 48V 750W, 48V 500W with the newest controller(leads for shift sensor and 6V headlight direclty from the controller are available with our bbs kits) and 48V new polly Jumbo shark frame battery; the larger capacity the battery has, the longer distance the ebike can ride each charge, also 52V battery would enable the ebike to be more powerful then 48V battery. 

Alluminum alloy charger 2A, 3A or 4A for your choice(larger current enables faster charging for the battery). We have different frame batteries, please check carefully before ordering. Free BBS assembling tools will be provided with shipment.

Note: 1.  Our charging connector for the battery is round 5.5x2.1DC connector for charging current is less than 4A; and we use 5.5x2.5DC connector if charging current is 4A or larger. 

2. If you prefer to charge the battery to 90% for daily usage, please inform us and we will set for you.

3. There are three casings for this battery, the mountings, the discharging prot and charging port are the same, only the height is different. Please pay attension to the dimension before ordering. The dimensions for the casings are 368 X 90 X 96mm(maximum 52pcs cells), 368 x 90 x 113mm(maximum 70pcs cells), and 368 x 90 x 140mm(maximum 91pcs cells).