DZ41 screen(UART) for Bafang BBS motor, UART M620 motor, UART M400 motor, UART M420 motor.

This LED meter is suitable for all the Bafang UART motors. How to identify your motor is UART motor or not? Just check the screen connector, it is a round female connector, then it is UART Bafang motor display.

Bafang Ultra M620 /G510 crank arms. 

There are two types G510 crank arms, one is for Fatbike/snowbike and the other is for MTB. The off-set for the two crank sets are different. Please note.

DP C18 display for Bafang mid motors, such as BBS01B, BBS02B, BBSHD, Max drive M400, G510 Ultra M620(UART) motors.

CAN protocol DP C18 display will not work for BBS01 or BBS02; if your motor is M620 model, please check the display connector or protocol before ordering the display.

The display has 5 level assisting and 6km walk assisting.

The DP C18 display has two versions, one has two modes for option, Eco mode and the Sport Mode, another version is standard one which cannot set different mode.

The DP C18 display with bluetooth and key pads are the newest version C18 display, you can download Bafang Go app on the mobile and view the datas.

The default C18 display for BBS series motor has one mode; the default C18 display for Ultra M620 motor has two modes, Eco and sport modes. Of course, you can also use two modes UART display for the BBS too. Bafang displays are interchangeable if they are the same protocol(the connectors are the same).

The c18 displays shows power, voltage, current consumption, mileage, time, speed etc. For details, please view the specificaiton here: DP C18 user's manual

Bafang mid motor gasket for Ultra M620/ G510 motor.

Bafang MAX drive M400 MM G330 / Bafang Ultra MM M620 G510 / Bafang M420/ Modest drive M300 G360 headlight cable / tail light cable

Cable length: 1m

We recently sourced tail light cables too.

Therefore the light cables are sell as pair, including tail light and headlight cables;

If you need the taillight for your Max drive or Ultra motor, please click here: 6V E-bike rear light, powered by Bafang max drive or Ultra M620 motor/controller

If you also need the headlight, please click here: 6V e bike LED headlight, directly powered by the Bafang M400 or G510 motor/controller;

Dengfu carbon frame E22 /E10 /E23 etc. derailleur hanger. Installation bolt and screw are included.

Bafang M620 M600 M500 M510 chainring spider BCD104;

If you install the BCD104 for M620, a 3mm thickness BB spacer would be needed.

Bafang M600 M510 chainwheel stabilizer.

Bafang Ultra M620 / G510 full suspension ebike alloy frame, 17" or 19" with glossy color. The frame is for 27.5" or 29" bikes only.

The price does not include the battery. If you need the battery, please email us, we can build the battery for you(you can choose Samsung or LG cells for the battery).

The intube battery case for this bike frame can max build 48V 17.5Ah.

Maximum tire: 29x3.0;

Head tube: 130mm;

Headtube angle: 64° ;

Real spacer: 148mm;

Material: 6061-T6 alloy

If you need carbon frame for the Bafang M620 kit, we also have carbon frame. Please email us if you need details for the carbon frame.

Bafang Ultra G510 M620 speed sensor;

Bafang M400 MAX drive G330 motor speed sensor;

Bafang Modest drive M300 G360 speed sensor.

Bafang M420 speed sensor.

Important: There are two types speed sensors, you can identify them by the connector, 4 pins connector is for CAN motors, and 3 pins connectors is for UART motors, please check your original speed sensor's connector before ordering. You can also check our pictures on the website for the connectors.

Thumb throttle/accelerator for Bafang central driven motor kit bbs01, bbs02,  BBSHD, Ultra G510 M620, Max drive M400, M420, M500, M600 or M800 mid motors.

Note: This throttle also fit for Bafang Max Drive M400 G330 motor, but you need to change to a 1T4 EB-BUS, otherwise you cannot connect the throttle to your Max drive unit.

Bafang shift sensor for MAX drive M400 G330, modest drive M300 G360, Bafang M420, Ultra M620 G510 mid motor.

Bafang Ultra M620/ G510 mounting bolts /nuts /washers, including chain wheel lock nut and the other bolts as shown in the picture.

If you need a special spanner for the chainwheel lock nut, please check from here: Bafang M620 chainwheel lock nut wrench 

SW102 mini LCD display for Bafang motors. This LCD is suitable for any Bafang motor with UART protocol(the round 5pin display connector), such as BBS01, BBS02, BBSHD, Ultra G510, Max drive M400, M420 etc.

1.3" OLED screen, waterproofed and small current consumption. 

If you need uers' manual, please click here: Bafang SW102 LCD display uers' manual